|
|
|
LI8014 CLINOSTAT
|
|
To run 30 hours in vertical or horizontal position and to carry weights, with clock movement based on heavy metal stand.
| |
 |
 |
|
LI8015 CLINOSTAT ELECTRIC |
For demonstration of heliotropism and geotropism, germinating seedings are pinned to the cork table which is rotated by an electric motor. About 70mm dia cork linked disc, with fitting to take specimen tube clear plastic cover, angle adjustable from horizontal to vertical by a thumb screw, clock work motor which rotates 4 revolutions per hour, 220V 50hz supplies. Complete with 3 core cable. Height about 30cm.
| |
|
LI8016 CLINOSTAT ELECTRIC
|
|
Similar to above but complete with tube carrier & plant pot.
| |
 |
 |
|
LI8017 INSECT COLLECTING NET WITH ALUMINIUM HANDLE |
Ring made of iron wire supported on anodized aluminium pipe handle with fine rubber grip at end. Length of handle 75 cm. long net fitted in ring through 5 cm. wide cloth rim. Dia. to bag at free end 25cm. Ring dia. 30cm.
| |
|
LI8018 DISECTING SET
|
|
Biological instruments set consisting of 14 instruments housed in a velvet lined rexine pouch. Contains following:
| Scussors 2 Nos.
| Forceps 2 Nos.
| Needles 4 Nos.
| Scalpel 1 No.
| B.P.Needle with blade 1 No.
| Razor 1 No.
| Magnifying glass 1 No.
| Chain and Hook 1 No.
| Blow pipe 1 No.
| Also available in 7, 8 and 18 instrument set.
| | | | | | | | | | | |
 |
 |
|
LI8019 PLANKTON NET |
Made of No. 12 standard silk bolting cloth, 125 mesh per sq. inch 89 cm. Long net suspended by muslin reinforcement to a 24 cm. dia. ring. Three braided leaders attached to swivel front. Tail of bag with 2 cm. opening closed by trying cloth tape placing glass vial.
| |
|
LI8020 DISECTING SCISSORS, STRAIGHT
|
Very fine points for delicate work, closed shanks, stainless steel. Available in different sizes.
| |
 |
 |
|
LI8021 DISECTING SCISSORS, BLUNT TYPE |
Stainless steel, closed shanks. Available in different sizes.
| |
|
LI8022 FORCEPS, POINTED ENDS
|
|
Stainless steel. Available in different sizes.
| |
 |
 |
|
LI8023 FORCEPS, BLUNT ENDS |
Stainless steel. Available in different sizes.
| |
|
LI8024 SCALPAL HANDLES No. 3
|
|
Strong alloy handles slotted to accept blades.
| |
 |
|
|
LI8025 SCALPAL/B.P. HANDLE No. 4 |
Straight, stainless stell throughout. Handle length 95 mm.
| |
|
LI8026 DISECTING TRAYS
|
|
Stainless Steel 20 x 15 cms. 25 x 20 cms. 30 x 20 cms. 38 x 30 cms. 46 x 30 cms.
|  |
|
Polyethylene Size 45 x 60 cms.
|  |
|
Aluminium Sheet
|  |
|
|
|
